Quantum Dots

Qual

Qual Journals

Quantum Dots

AMPA Receptor

SAP

In this schematic of the overall structure of a Qdot® nanocrystal streptavidin conjugate, the layers represent the distinct structural elements and are roughly to scale.

Quantum Dot nanocrystals are fluorophores—substances that absorb photons of light, then reemit photons at a different wavelength.1–3 However, simple comparisons with organic fluorescent dyes and naturally fluorescent proteins end there. Qdot. nanocrystal conjugates combine exceptional fluorescence with full biofunctionality for a wide variety of life science applications. This combination is especially important for those applications requiring excellent photostability and multicolor detection from a single excitation source.

Error creating thumbnail: File missing

Relative size (hydrodynamic diameter in nm) of Qdot® nanocrystals. Qdot® nanocrystals are roughly protein-sized clusters of semiconductor material.

Qdot nanocrystals are nanometer-scale (roughly protein-sized) atom clusters comprising a core, shell, and coating (Figures 1 and 2). The core is made up of a few hundred to a few thousand atoms of a semiconductor material (often cadmium mixed with selenium or tellurium). A semiconductor shell (zinc sulfide) surrounds and stabilizes the core, improving both the optical and physical properties of the material. An amphiphilic polymer coating then encases this core and shell, providing a water-soluble surface that can be differentially modified to create Qdot. nanocrystals that meet specific assay requirements.

Howarth and colleagues have achieved real-time imaging of the complex formed between a single ligand-labeled nanocrystal and its target receptor on live neurons,7 an approach whose success these authors attribute in part to the brightness inherent in the nanocrystal particles. Furthermore, cells and tissues labeled with Qdot. nanocrystals can be archived permanently and reanalyzed with the same level of sensitivity as achieved in the initial assay.

Error creating thumbnail: File missing

Qdot® 625 goat anti-mouse conjugate immunolabeling of microtubules in HeLa cells. Fixed and permeabilized HeLa cells were labeled with mouse anti– α-tubulin primary antibody and 20 nM Qdot® 625 goat anti–mouse IgG.

Qdot. 625 streptavidin and goat anti–mouse IgG and anti– rabbit IgG secondary antibody conjugates provide a high level of resolution and brightness for immunostaining of cells grown in culture (Figure 8). For those who wish to conjugate their own antibodies to these ultrabright nanocrystals, the Qdot. 625 Antibody Conjugation Kit is available.

Stated simply, quantum dots are semiconductors whose electronic characteristics are closely related to the size and shape of the individual crystal. Generally, the smaller the size of the crystal, the larger the band gap, the greater the difference in energy between the highest valence band and the lowest conduction band becomes, therefore more energy is needed to excite the dot, and concurrently, more energy is released when the crystal returns to its resting state. For example, in fluorescent dye applications, this equates to higher frequencies of light emitted after excitation of the dot as the crystal shrinks to smaller sizes, resulting in a color shift from red to blue in the light emitted. In addition to such tuning, a main advantage with quantum dots is that, because of the high level of control possible over the size of the crystals produced, it is possible to have very precise control over the conductive properties of the material.[6] Quantum dots of different sizes can be assembled into a gradient multi-layer nanofilm.

Making Quantum Dots

Here's the way I understand it.

Error creating thumbnail: File missing

Quantum dots are conjugated with an IgG antibody, this antibody is in the form of a Fab Fragment (specifically a F(ab’)2 fragment). This construct of QD-Fab, is your secondary antibody construct, which will recognize IgG antibodies of a given species. This is incubated with primary antibody (IgG) specific to the protein of interest (AMPAR).

• In the 2007 paper they use an Olympus IX70 Inverted microscope.

• We want the Nikon Eclipse Ti inverted microscope

Single-Nanoparticle Tracking.

A total of 1 μL of 655-nm Quantum dots (Qdots) conjugated (see also antibodies) to goat (Fab‘)2 anti-mouse IgG (Invitrogen) were incubated with 1 μL Fab anti-GluA2 in 7 μL PBS for 20 min at room temperature. Nonspecific binding was blocked by adding 1 μL of 10% casein stock solution for 15 min (Vector Laboratories), and this solution was kept at 4 °C throughout the experiment. Neurons were incubated for 10 min at 37 °C in 1 mL culture medium containing 1 μL of the anti-GluA2-coated Qdot solution, then rinsed and mounted in an aluminum chamber containing Tyrode solution (30 mM glucose, 120 mM NaCl, 5 mM KCl, 2 mM MgCl2, 2 mM CaCl2, 25 mM Hepes) on a Nikon microscope (NIKON Eclipse TE2000-U) thermostated to 37 °C using an air blower (World Precision Instruments) and an objective heater (Bioptechs). Single Qdots were detected through a100 × 1.4 N.A. oil immersion objective, using a 100-W mercury lamp and appropriate excitation/emission filters (Chroma). Sequences of 50 s, corresponding to stacks of 1,000 images with an integration time of 50 ms, were acquired using a CCD camera (Quantem; Roper Scientific). For each coverslip, Qdots were followed on randomly selected dendritic regions (size 20 × 20 μ m) for up to 20 min. Two coverslips of each condition were processed for a total of 3 – 4 neuronal cultures. We checked for specificity of Qdot binding by preparing primary hippocampal cultures from GluA2 KO mice dissected at p0. Anti – GluA2- conjugated Qdots bound minimally to cultures from GluA2 KO compared with those prepared from wild-type littermates.

Antibodies and drugs.

The antibody to the N-terminal epitope of the GluR1 subunit was described previously46. We used a commercial antibody to an N-terminal epitope of the GluR2 subunit to detect GluR2 (BD Pharmigen). AMPA receptor labeling and synaptic live staining. Quantum dot 655 goat F(ab')2 antibody to rabbit IgG conjugate (H+L) highly cross-absorbed and quantum dot 655 goat F(ab')2 antibody to mouse IgG conjugate (H+L) highly cross-absorbed were obtained from Quantum Dot (Invitrogen). Receptors were stained using quantum dots pre-coated with antibody to GluR1 or monoclonal antibody to GFP. Quantum dots (0.1 M) were incubated with 1 g of antibody in 10 l of phosphate-buffered saline (PBS) for 15–30 min. Unspecific binding was blocked by adding casein (Vector Laboratories) to the pre-coated quantum dot 15 min before use. Neurons were incubated 5–10 min at 37 °C in culture medium with pre-coated quantum dots (final dilution of 0.1–0.01 nM). The incubation was followed by four washing steps of 30 s each. All incubations and washes were performed in pre-warmed extracellular HEPES-buffered solution (see below).

Single molecule optical microscopy.

Cells were imaged at 35–37 °C in an open chamber mounted onto an inverted microscope (IX70 Olympus) equipped with a 60 (NA = 1.35, Olympus) or 100 objective (NA = 1.3, Olympus). Quantum dots and Homer1C-DsRed were detected using a xenon lamp (excitation filter HQ500/20X (Chroma), Mitotrack 560RDF55 (Omega)) and appropriate emission filters (HQ560/80M (Chroma Technology), 655WB20 (Omega Optical)). Fluorescent images from quantum dots were acquired with an integration time of 33 ms with up to 2,000 consecutive frames. Signals were recorded with a back-illuminated thinned CCD camera (Cascade 512BFT, Roper Scientific).

Quantum dot–labeled GluR1 receptors were monitored on randomly selected dendritic regions for up to 20 min of total experimental time. Recording of the synaptic marker over time revealed that the mobility of synapses was much slower in comparison to the mobility of the receptors (data not shown). Mobility of synapses themselves did not seem to affect our location method. Acquisition of the synaptic labeling before and after quantum dot recording as well as quantum dots fixed on the cover slip allowed us to compensate mechanical drifts of the stage, which would have lead to a false interpretation of receptor location.

Receptor tracking and analysis.

The tracking of single quantum dots was performed with homemade software based on Mathlab (Mathworks). Single quantum dots were identified by their blinking fluorescent emission and their diffraction-limited signals. Owning to the random blinking events of the quantum dots, the trajectory of a quantum dot–tagged receptor could not be tracked continuously. Subtrajectories of the same receptor were reconnected when the positions before and after the dark period were compatible with borders set for maximal position changes between consecutive frames and blinking rates. The values were determined empirically: 1–2 pixels for maximal position change between two frames and maximal dark periods of 25 frames. Mean square displacement curves were calculated for reconnected trajectories of at least 100 frames. Diffusion coefficients were calculated by a linear fit of the first four points of the msd plots versus time. The resolution limit for diffusion was 0.001 m2 s-1, as determined by msd calculations of fixed quantum dots. The resolution precision was 40 nm. Dwell times of individual receptors given in the results were measured from trajectories in which the entry and exit from the compartments could be identified. Synaptic or ECM compartments were identified by homer1c-DsRed expression or HABP staining, respectively. Pixels assigned to synapses or ECM were defined as a set of connected pixels obtained using two-dimensional object segmentation by wavelet transformation47

Electrophysiology.

The extra cellular medium contained 145 mM NaCl, 2.5 mM KCl, 2 mM MgCl2, 2 mM CaCl2, 10 mM HEPES and 10 mM D-glucose (pH 7.4). To block GABAA receptors, we added 50 M picrotoxin to the extra cellular medium. The bath temperature was kept at 33–35 °C. Borosilicate pipettes were used to produce patch electrodes with resistances of 3–5 M . A standard pipette solution was used to characterize neuronal properties in voltage and current-clamp conditions during development (Supplementary Fig. 7) and contained 140 mM potassium gluconate, 2 mM MgCl2, 4 mM NaATP, 0.1 mM EGTA, 10 mM HEPES, 10 mM phosphocreatine, 0.4 mM GTP (pH 7.25). To record mEPSC and to decrease space-clamp difficulties, we used another recording solution 125 mM CH3CsSO3, 2 mM MgCl2, 1 mM CaCl2, 4 mM NaATP, 10 mM EGTA, 10 mM HEPES and 0.4 mM GTP (pH 7.25). Recordings in voltage and current clamp mode were performed with an EPC10 double patch-clamp amplifier (HEKA Electronics). Data were acquired and stored using Pulse-Pulse fit software version 8.62 (HEKA Electronics, Lambrecht, Germany) and analyzed with IGOR (WaveMetrics) and GraphPad Prism software. Spontaneous events were analyzed by Minianalysis (Synaptosoft). Local activation of receptors was performed by iontophoresis of glutamate using an amplifier from NPI Electronics. Pipettes for iontophoretic stimulation had resistances between 40–60 M when filled with 150 mM sodium glutamate (pH 7.4). A small retaining current was needed to keep glutamate inside the pipette (usually between 10–50 nA). Current pulses between 30 and 600 nA and 1–2 ms duration were required to evoke AMPAR-mediated currents between amplitudes of 30–600 pA under control conditions.

Outside-out recordings.

Outside-out patches were pulled from 14–21 DIV neurons. Internal solution contained 130 mM CsCl, 2 mM MgCl2, 10 mM EGTA, 10 mM HEPES and 4 mM Na2ATP. Pipette resistance was 3.5–4.5 M . After patch formation, the pipette was placed under the flow of a theta application pipette containing HEPES-buffered solution in one line and HEPES-buffered solution, 10 mM glutamate and 20 mM sucrose in the other line to clearly visualize the interface between solutions. The application pipette was immerged in the bath and heated to 37 °C for at least 1 cm. It is thus assumed that solutions were close to that temperature. Fast application was achieved with a piezo-electric manipulator (Burleigh). After the recording, the application was controlled by measuring the junction current between the two solutions. To measure recovery from desensitization, it is important to verify that 1-ms applications effectively saturate receptors. We verified this by measuring the amplitude of the currents evoked by 1- or 100-ms applications (Supplementary Fig. 6). If the former was less than 80% of the latter, the recording was discarded; on average, current amplitudes were 497.2 160 pA (n = 10) for control and 334.3 143 pA (n = 10) for treated neurons, and the amplitude ratios (1 ms/100 ms) were 0.9 0.03 and 0.91 0.05 for control and treated neurons, respectively.

FRAP.

Transfected neurons (21–30 DIV) were placed on the heated stage (37 °C) of an inverted microscope (Leica CTR 6500) and continually perfused with preheated (37 °C) extracellular solution (composition as described above). For low-pH solution, HEPES was replaced by MOPS and adjusted to pH 5.5. To test the population of surface pHGFP-GluR1–containing AMPARs of a particular cell, we used a gravity-driven rapid solution exchange using a theta-glass electrode containing low-pH solution in one channel and NH4Cl (50 mM) in the other channel to determine the ratio between the fluorescent intensities48. Fluorescence was excited using a monochromator (Cairn) controlled by Metamorph software (Universal Imaging). To photobleach locally, we used a sapphire laser 488-20 (Coherent) at 30% power to avoid photodamage. The laser was coupled to the microscope via a galvometric mirror (Roper Scientific), which allowed us to photobleach several regions in a short time window. Recovery from photobleaching was monitored by consecutive acquisition at a 10-Hz acquisition rate. Recovery curves were corrected for continuous photobleaching and background noise as described elsewere49.

FLIP.

For FLIP experiments, the laser beam was parked at the dendritic shaft at a power of 10% and a additional 75% intensity filter was used to avoid photodamage in the continuous bleached region. Continuous laser illumination was interrupted during image acquisition at a frequency of 0.2 Hz. Control of surface expression and experimental conditions were similar to those for the FRAP experiments described above.

Vendors

• Invitrogen Quantum Dots
• BD Biosciences
• Choquet Methods

GluR2 Primary Antibody